top of page

Million tonne milestone for HS2’s Quainton freight trains

HS2 today confirmed that it’s construction hub at Quainton, Bucks, has now received more than a million tonnes of construction material by rail, taking the equivalent of 101,000 HGV movements off local roads across Bucks, Oxfordshire and West Northants. Situated on an existing freight line north of Aylesbury, the new railhead is expected to welcome an additional 1,400n freight trains over the next two years as construction of HS2 – which will improve links between London and the Birmingham reaches its peak.



The Quainton site, near the Buckinghamshire Railway Centre, will handle three million tonnes of material – mainly aggregates used for construction. It’s the fourth HS2 railhead to be set up in the county.


Over the last four years, deliveries by rail to Quainton, and previous railheads near Calvert, have taken a combined total of more than 217,000 HGVs off local roads and saved 22,378 tonnes of carbon, the equivalent as 22,300 single passenger flights from London to New York.


Once on site, most of the material is stockpiled before being moved up or down the line of route of the new high-speed line on a series of dedicated haul roads to keep it away from local road users.


Welcoming the milestone, HS2 Ltd Senior Project Manager Ben Sebastian-Green said:


“We know that the local community are concerned about construction traffic, so it’s great to be able to get so much material into site by rail. Not only does it take traffic off local roads, but it also saves carbon and helps to streamline our logistics.


“Once complete, HS2 will improve journey between London and Birmingham and free up space on the existing West Coast Mainline for more local services – and it’s great that, alongside delivering zero carbon journeys for passengers, we’re also cutting the amount of carbon in construction.”


The railhead is managed by HS2’s main works contractor EKFB – a team made up of Eiffage, Kier, Ferrovial Construction and Bam Nuttall. EKFB are delivering the central section of the project, including 15 viaducts, 81 bridges and two ‘green tunnels’.


They worked with a team from Network Rail who completed a series of alterations to enable freight services to operate in and out of the railhead at Quainton.


EKFB’s Head of Logistics and Security, Paul Bedford, said:


“Moving material by rail was always an essential part of our strategy to help deliver this project efficiently. The original strategy was to utilise existing railheads across neighbouring counties and move the material the last few miles to site by road. We quickly realised that there was an opportunity to establish our own railheads within project area, and through the hard work of all involved, we turned this opportunity into a reality. The railheads are now taking large volumes of HGVs off the local road network, reducing our carbon footprint through fewer road journeys, and helping to generate significant financial savings by using a more cost-effective distribution system.”


The railhead is operated by Fishbone Solutions on behalf of EKFB with trains operated by DC Rail and GB Railfreight on behalf of Hanson.


Director at Fishbone Logistics, Paul Clews, commented:


“What started with an initial trial of 100,000 Tonnes to the first railhead at Calvert North, the support and cooperation from EKFB, HS2, the quarry and the rail logistics supply partners, to deliver the two millionth ton to the fourth railhead at Quainton Road, has been a fantastic collaborative effort. Zero safety incidents, reduced carbon and transport costs, and more than 200,000 truck journeys taken off local roads is a great achievement by all involved.”



留言


bottom of page